How to Read a Certificate of Analysis (COA) for Research Peptides

The Certificate of Analysis is the single most important document in any peptide order. It is the manufacturer's formal statement of what was tested, how it was tested and what the result was. If you only read one thing before accepting a shipment, read this.

Below is a practical, line-by-line walkthrough of a typical research peptide COA — what each field means, which ones matter most, and the warning signs worth querying with your supplier.

What a COA is (and is not)

A COA is a batch-specific record of test results. It is not a certificate of regulatory approval, and it is not a substitute for your own incoming QC. What it should do is give you enough information to decide whether the material is what you ordered, at the purity you specified.

The key rule A COA must relate to the specific batch you received. A generic COA reused across shipments tells you nothing about the material in your hands.

The fields that matter, in order

1. Product name and batch number

Start here. The product name and, critically, the batch or lot number must match the label on the vial and the packing list. Batch numbers are what let a manufacturer trace a product back to its synthesis record and retained sample. If your COA has no batch number, ask for one.

2. Test methods

The method column is where purity claims become meaningful. Look for two things:

  • Purity method — usually analytical HPLC, ideally with the column, gradient, wavelength and integration method stated.
  • Identity method — usually mass spectrometry (LC-MS or ESI-MS), confirming the observed molecular weight matches the theoretical value.

A COA that states a purity percentage without stating the method is an assertion, not evidence. A COA with HPLC purity but no identity test only proves the material is clean — not that it is the right molecule.

3. Purity figure

Purity is normally reported as area percentage by HPLC at a stated wavelength (214 nm or 220 nm are common for peptides). Two points to check:

  • Is the specification (e.g. ≥99%) stated alongside the measured result?
  • Does the reported figure match the chromatogram if one is provided?

Be cautious of "purity" figures quoted without a wavelength or integration method — small method differences can shift a result by a percentage point or more.

4. Appearance and solubility

Appearance (for example, "white to off-white lyophilized powder") is a simple visual check, but it is a useful confirmation that the material was lyophilized correctly and has not degraded or absorbed moisture. Copper peptides, for instance, are characteristically blue.

5. Storage and shelf life

The COA should state recommended storage conditions and a retest or expiry date. For most lyophilized research peptides this will be -20 °C, desiccated and protected from light. Follow it — storage is where good material most often goes wrong.

6. Authorisation

A valid COA is signed or stamped by the releasing authority, typically QC. An unsigned document has limited value in an audit trail.

Warning signs worth querying

  • Purity stated with no test method or wavelength
  • No batch number, or a batch number that differs from the vial
  • Identity (mass spec) not tested at all
  • A single generic COA offered for all products
  • Values presented as "typical" rather than as measurements for your batch
  • No storage guidance or retest date

None of these are automatically disqualifying — but each one is a question you should ask before you release material into your process.

A five-minute COA checklist

  1. Product name matches the order and the label.
  2. Batch number matches the vial and packing list.
  3. Purity method and wavelength are stated.
  4. Identity confirmed by mass spectrometry.
  5. Results meet the specification you agreed.
  6. Storage conditions and retest date are clear.
  7. The document is signed by QC.

What to do if something is missing

Ask. A supplier with a functioning quality system can normally supply the chromatogram, the mass spectrum and the batch record reference within a working day. Difficulty obtaining these is itself useful information.

If you would like to see a sample COA and chromatogram for any product in our catalog, get in touch and tell us the product and batch — we will send the documentation you need.

Keep Reading

Related Quality Resources

Specify With Confidence

Every QcPeptide order ships with a batch-specific COA and MSDS. Chromatograms and mass spectra on request.